Juice Super C Cutting Compound

The water-based formula of Q-cut compounds makes them ideal for use in all industrial and marine applications. Q-cut is simple to apply and take off, which considerably cuts down on buffing time.Every single time, Q-cut successfully removes 1500 and finer sand scratches. Without the use of silicones, waxes, or fillers, Q-cut leaves a deep, high-gloss, wet-look finish.

Shake firmly before using. To a compound pad's entire face (made of wool or foam), apply the substance. Over the prefered work area, spread evenly. Between 1200 and 1800 rpm, buff from front to rear and side to side until the majority of the compound has been removed and gloss has appeared. Using a fresh cleaning cloth, remove any excess compound. The best results come from adding Juice Speed Wax after.

Sizes in 500ml, 1 and 4 litres are available.