Scott Technology
Scottech MEKP Catalyst
Scottech MEKP is the catalyst that reacts with the Resins, Flowcoats and Gelcoats to make them go hard. You can adjust the % amounts to give you more worktime or a quicker gel-time. Recommended addition rate is between 1.5 – 2.5%.
Scott Technology
Scottech Pigment Paste 30g
Tint filler, flowcoat and gelcoat with Scottech Pigment Paste 30g.Add the colour gradually until you reach the shade you want. Each jar holds 30g of pigment paste.Key features Tints filler, flowcoat and gelcoat Add gradually to reach the desired colour 30g jar Available in a range of colours, inc...
Scott Technology
Scottech Flowcoat
Like Scottech Gelcoat, our Flowcoats are formulated with high grade isophthalic acid and neopentyl glycol (ISO-NPG) to maximise the resistance to weathering, chemicals and seawater. To ensure their performance in marine applications, a wax additive has been added that will rise to the surface dur...
Scott Technology
Scottech Gelcoat
Scottech Gelcoats are formulated with high grade isophthalic acid and neopentyl glycol (ISO-NPG) to maximise the resistance to weathering, chemicals and seawater, expected when used in marine applications compared to conventional orthophthalic resins. Our Gelcoats are designed to be applied to mo...
Scott Technology
Scottech Styrene
Styrene monomer is a thinner used in gelcoats and resins to help with application. When used with resins and gelcoats, it is the prefered thinner/reducer versus acetone because it does not cause gelcoat to yellow. NOTE: In general, do not thin resin or gelcoat more than 10%. This product is highl...
Scott Technology
Scottech Wax in Styrene
Scottech Wax in Styrene is a mixture of styrene monomer and paraffin waxes.It is added to polyester and vinylester resins to remove tackiness from the resin surface.Key features Mixture of styrene monomer and paraffin waxes For polyester and vinylester resins Removes tackiness from the resin surf...
Allnex
Allnex Gelcoat Nutech 333 White Spray
Allnex Nutech 333 is a white spray gelcoat for a bright, long-lasting finish on new mouldings and repairs.It is formulated on an isophthalic acid and neopentyl glycol polymer, which gives strong durability, good colour retention and resistance to both water and chemicals, so the white finish hold...
Allnex
Allnex Flowcoat Nutech Super White Brush NB9019
NB9019 NUTECH Super White Brush Flowcoat represents a top-tier brushing grade Flowcoat, crafted from ortho-NPG Polyester Resin. This product is pre-promoted, designed to cure efficiently when combined with appropriate MEKP initiators. Nutech Super White Brush Flowcoat is typically employed as the...
Allnex
Allnex Flowcoat (Top Coat) 5L
Allnex Flowcoat is a wax-containing polyester topcoat, supplied in 5 litres, used as a tough, tack-free final coat over polyester laminates.The added wax lets the surface cure hard and sandable, giving a durable, sealed finish on the inside of hulls, tanks and mouldings. Add catalyst as directed ...
Allnex
Allnex Gelcoat Nutech - Marine Detail Blend - 5kg
Allnex Gelcoat Nutech Marine Detail Blend is a premium gelcoat formulated for superior protection and a high-quality finish on marine surfaces. Designed to deliver excellent gloss, colour retention, and durability, it provides long-lasting resistance against water, weathering, and general wear.
Allnex
Allnex Gelcoat
Gelcoats employed in marine settings demand exceptional durability and superior weather resistance. Their advanced composition ensures boat builders access top-tier quality and long-lasting finishes, capable of enduring over time. These gelcoats boast remarkable UV and water resistance, maintain...
ATL
Technirez H1300 Epoxy Flowcoat Hardener
Technirez H1300 is the hardener for Technirez R1300 epoxy flowcoat resin. The two parts are used together and cure at room temperature.The R1300 and H1300 system is solvent-free and made for flow-coating the interiors of hulls, lockers and other marine surfaces. Once cured it gives a durable, hig...
ATL
Technirez R1300 Epoxy Flowcoat Resin
Give bilges, lockers and hull interiors a tough, glossy, easy-clean surface with Technirez R1300 Epoxy Flowcoat Resin.Technirez R1300 is a solvent-free epoxy resin formulated for use with H1300 hardener and designed to cure at room temperature. It self-levels to a smooth finish, brushes well, mix...
CAM
CAM Metal Applicators - 4 Set
CAM Metal Applicators are spring steel applicators for applying fillers, supplied as a set of 4.Use them to spread filler over the repair and smooth it off before it sets. Being metal, they can be wiped down and used again on the next job.Key features Metal spring steel applicators For applying f...
Allnex
Allnex Flowcoat Escon Ortho Brush - OSP
Allnex Flowcoat Escon Ortho Brush is a brush-applied flowcoat for composite surfaces that leaves a smooth, glossy finish with strong adhesion.It is durable, easy to apply and resistant to weather and chemicals, which makes it well suited to marine and industrial use.Key features Brush-applied flo...
Scott Technology
Scottech Gelcoat Red Tooling - 20Kg
Scottech Red Tooling Gelcoat, supplied in 20kg, is a high-quality gelcoat formulated for building moulds and tooling, where a hard, durable mould surface is needed.The bright red colour gives good contrast against clear laminating resin, making it easy to see coverage and thickness during layup. ...
Allnex
Allnex Gelcoat Polyplex Red Tooling - 20Kg
Built for mould and plug work, Allnex Gelcoat Polyplex Red Tooling is a polyester-based gelcoat designed for tooling applications.It offers outstanding heat and impact resistance, is easy to apply during layup and finishes with a brilliant high gloss.Key features Polyester-based tooling gelcoat O...
Allnex
Allnex Gelcoat Nutech 894 Neutral Spray
Allnex Nutech 894 is the Neutral spray gelcoat in the Nutech range, offered in a small pack for repairs and a larger pack for production work.It is formulated on an isophthalic acid and neopentyl glycol polymer, giving a durable gelcoat with good resistance to both water and chemicals.Key feature...
Fortified Oceanic Pty Ltd
Swancor 901-TP Vinyl Ester Resin - 25kg
Swancor 901 vinyl ester resin, serves as a versatile resin in the production of fiberglass-reinforced plastic components. It is employed in various applications requiring resistance to a wide spectrum of acid, base, and salt solutions, maintaining its efficacy at temperatures up to 100 degrees C...
Scott Bader
Scott Bader Crystic Spray Gelcoat LS 30 18kg Unwaxed
Scott Bader Crystic Spray Gelcoat LS 30 is an ISO/NPG spray gelcoat, supplied unwaxed in 18kg.Also described as Crystic Gelcoat LS 30PA, it is a gelcoat made for spray application and comes in a neutral colour.Key features Crystic Gelcoat LS 30PA ISO/NPG spray gelcoat Unwaxed 18kg Colour: Neutral...
Allnex
Allnex Gelcoat Nutech 885 Charcoal Grey - 21.4Kg
For a deep charcoal finish straight from the gun, Allnex Nutech 885 is a spray gelcoat in Charcoal Grey, supplied in a 21.4kg pack.Like the rest of the Nutech spray range, it is formulated on an isophthalic acid and neopentyl glycol polymer for durability, colour retention and resistance to both ...

