store_mall_directory AkzoNobel

- Premium, high-strength antifouling for use in the most severe fouling circumstances.- Biolux technology keeps your hull cleaned for a longer period of time.- Wears away with use, allowing for minimal paint build-up.

store_mall_directory AkzoNobel

Micron One is a high-strength, general-purpose antifouling based on cuprous oxide. It dries quickly and can be applied on fibreglass, wood, and prepped submerged metals, but not to aluminium. DANGEROUS GOODS: Additional delivery fees apply. Feel free to click and collect instore for no extra char...

store_mall_directory AkzoNobel

Biolux Technology provides long-term antifouling protection.Slow polishing formula for aluminium craft, outdrives, outboards, and any other substrate.Available in a variety of vivid colours, including dazzling white.

store_mall_directory AkzoNobel

Ultra 2 is a high-performance hard antifouling that, because to its smooth, low-friction surface and scrubbable finish, is suitable for fast powerboats. It is suitable for all craft and may be used on fibreglass, wood, and prepped submerged metals, with the exception of aluminium.

store_mall_directory AkzoNobel

-Based on a more traditional type of technology, the Biolux technology combines a slower polishing rate with a higher biocide level.-Maximum antifouling power.-Advanced performance in all conditions for difficult fouling. DANGEROUS GOODS: Additional delivery fees apply. Feel free to click and col...

store_mall_directory AkzoNobel

Micron 99 is intended to provide complete antifouling protection against all fouling. Because it is a multi-seasonal Self Polishing Copolymer (SPC), it can improve fuel efficiency and speed over time. Application on vessels over 20 meters (approximately 65 feet).

store_mall_directory AkzoNobel

An antifouling that has been particularly developed to reduce surface friction and drag. Its hard, scrubbable surface makes it perfect for racing, sailing, and power boats.

store_mall_directory AkzoNobel

A strong, slip-resistant deck paint that guards against everyday wear and tear. It's simple to apply, comes in a variety of colours, and has a low sheen finish that keeps sunlight from bouncing off decks.

store_mall_directory AkzoNobel

Bilgekote prevents moisture penetration and wear and strain on bilges, lockers, and bulkheads. It also resists oil and fuel spills and is simple to clean. DANGEROUS GOODS: Additional delivery fees apply. Feel free to click and collect instore for no extra charge. 

store_mall_directory AkzoNobel

Toplac Plus is a top gloss silicone alkyd yacht enamel for all substrates above the waterline. It is simple to apply with a roller and does not require tipping. UV filters are included in Toplac Plus for better durability.

store_mall_directory AkzoNobel

One UP is a single-pack primer/undercoat for use with International one-pack finishes and deck paints above the waterline. Simple yet effective, making DIY customers' painting easier without sacrificing aesthetic appearance or substrate protection.

store_mall_directory AkzoNobel

Interprime 820 is a two-component epoxy primer with exceptional performance. It is suitable for use on a variety of substrates above and below water since it contains inert pigments, extenders, and anti-corrosive protection.

store_mall_directory AkzoNobel

Antifouling recoat window extended to 5 days.Two-pack epoxy tie coat with no tar.Above the waterline, it can also be used as a tie coat between primers and certain polyurethane finishes.

store_mall_directory AkzoNobel

Anti-corrosive primer with high performance.Pure epoxy coating provides the highest levels of water resistance as well as excellent long-term anti-corrosive protection.Suitable for use with cathodic protection that is controlled.

store_mall_directory AkzoNobel

This product is used in thin layers to give anchoring for the following paint system. When the chosen paint system is applied, a reaction occurs between it and the Etch Primer, resulting in increased adhesion levels.

store_mall_directory AkzoNobel

Everdure is an ultra-low viscosity timber primer that is applied before painting. It's a two-pack product that may also be used to seal and harden soft wood surfaces to decrease moisture absorption.

store_mall_directory AkzoNobel

Primocon is a one-part primer that dries quickly and is used below the water line before applying antifouling. Designed for use with timber, steel, aluminium, cast iron keels, and lead keels. DANGEROUS GOODS: Additional delivery fees apply. Feel free to click and collect instore for no extra char...

store_mall_directory AkzoNobel

Intergrip is a granular synthetic material that can be used to topside finishes before application or sprinkled onto wet paint to give a slip-resistant finish. The more you add, the better the grip.

store_mall_directory AkzoNobel

Universal Thinner No.4 is a highly effective general purpose thinner thanks to its unique solvent blend. However, it has no effect on the durability, flexibility, or toughness of the products to which it is applied.

store_mall_directory AkzoNobel

Thinner No.100 is designed specifically for thinning Toplac Plus and Perfection Pro. At high temperatures, this makes it easier to apply the substance using a brush.

store_mall_directory AkzoNobel

Thinner No.10 thins and cleans two-part polyurethane products using its unique solvent blend. However, it has no effect on the durability, flexibility, or toughness of the products to which it is applied.

store_mall_directory AkzoNobel

A specifically developed solvent combination designed solely for thinning and cleaning PA 10. Importantly, it has no effect on PA 10's durability, flexibility, or toughness.

store_mall_directory AkzoNobel

Enamel Thinner No.1 is a general purpose thinner and cleaner with a particular solvent blend that can be used with one-part paints and varnishes, except antifouling. DANGEROUS GOODS: Additional delivery fees apply. Feel free to click and collect instore for no extra charge.