The No-Mess Structural Epoxy Boat Builders Swear By
If you’ve ever mixed epoxy on a boat or in a shed, you know the pain: pumps, ratios, filler powders, drips everywhere, and wasted product. Six10 Thickened Epoxy Adhesive was created to solve exactly that problem.
Six10 is a two-part, pre-thickened epoxy packaged in a self-mixing cartridge, making it one of the easiest and cleanest ways to achieve strong, waterproof, structural bonds in marine applications.
Whether you’re bonding, filleting, gap-filling or making small structural repairs, Six10 delivers consistent results with minimal setup.
What Is Six10?
Six10 is a pre-thickened, structural epoxy adhesive designed for use in a standard caulking gun. The resin and hardener mix automatically through the static mixer nozzle, eliminating guesswork and reducing waste.
It’s ideal for:
-
Boat repairs
-
Hardware bonding
-
Fillets and seams
-
Small structural joins
-
Confined or awkward areas
No pumps. No fillers. No mess.
Key Features & Benefits
✔ Self-Mixing Cartridge
-
Automatically mixes resin and hardener at the correct ratio
-
No measuring or hand mixing required
-
Consistent strength every time
✔ Thickened, Non-Sag Formula
-
Perfect for vertical and overhead applications
-
Excellent gap-filling properties
-
Holds shape for fillets and seams
✔ Structural Strength
-
Designed for load-bearing bonds
-
Waterproof and marine-grade
-
Suitable for permanent repairs
✔ Clean & Efficient
-
Dispenses like a sealant
-
Minimal waste compared to traditional epoxy mixing
-
Ideal for small jobs where full epoxy kits are overkill
Typical Applications
Six10 is commonly used for:
-
Bonding bulkheads, cleats, blocks and fixtures
-
Filling gaps between timber, GRP or composites
-
Creating strong fillets in tight spaces
-
Structural repairs where access is limited
-
Boatbuilding, refits and DIY marine repairs
It bonds exceptionally well to:
-
Timber
-
Fibreglass (GRP)
-
Carbon fibre
-
Metals (properly prepared)
Why Choose Six10 Over Traditional Epoxy?
Traditional epoxy systems are brilliant — but not always practical for small or awkward jobs.
Six10 is ideal when:
-
You don’t want to mix fillers
-
You only need a small amount of epoxy
-
You’re working overhead or in confined spaces
-
You want clean, predictable results fast
For many repairs, Six10 is simply faster, cleaner, and less stressful.
Working & Cure Information (Typical)
-
Working time: ~40 minutes at 25°C
-
Initial cure: Overnight
-
Full cure: 24–48 hours (temperature dependent)
-
Application method: Standard caulking gun
(Always refer to the product technical data sheet for exact cure times and temperature ranges.)
Pro Tips for Best Results
-
Dry-fit parts before applying epoxy
-
Clean and degrease surfaces thoroughly
-
Lightly sand smooth surfaces for best adhesion
-
Purge a small amount of product before use to ensure proper mixing
-
Dispose of static mixer after use — they are single-use
Is Six10 Right for Your Project?
If you’re:
-
Doing a small to medium marine repair
-
Bonding components without wanting to mix epoxy by hand
-
Looking for professional results with minimal setup
Six10 Thickened Epoxy Adhesive is one of the easiest wins in boat maintenance.
Available Now at Fortified Oceanic
We stock Six10 Thickened Epoxy Adhesive for pickup or shipping Australia-wide.
If you’re unsure whether Six10 is suitable for your specific application, our team is always happy to help.
