Awlgrip Flattening Agent

Achieving a flat or semi-gloss finish on your boat's topcoat can enhance its appearance and reduce glare. Awlgrip Flattening Agent G3013 is specifically formulated to reduce the gloss of Awlgrip and Awlcraft 2000 urethane topcoats, providing a matte or satin finish.

Why Use Awlgrip Flattening Agent G3013?

• Aesthetic Control: Tailor the gloss level of your topcoat to suit your preferences or specific application needs.

• Enhanced Appearance: A matte or semi-gloss finish can offer a more subdued, elegant look, reducing glare and reflections.

How to Use Awlgrip Flattening Agent G3013

1. Mixing Ratios:

   • For Semi-Gloss Finish:
     • 1 part by volume Awlgrip Color Base
     • 1/2 part by volume Flattening Agent G3013
     • 1 part by volume Awl-Cat #2 Converter
     • 1 part by volume T0003 Reducer
   • For Flat Finish:
     • 2 parts by volume Awlgrip Color Base
     • 2 parts by volume Flattening Agent G3013
     • 1 part by volume Awl-Cat #2 Converter
     • 1 part by volume T0003 Reducer
   • Thoroughly mix the components to achieve a homogeneous mixture.

2. Application Method:

   • Spray Application: Apply three full coats, each with a wet film thickness of 75 microns (3 mils). Use a spray tip size of 1.2 mm. Avoid mist coats, as they can result in a rough appearance.
   • Roller Application: If spraying is not feasible, rolling is preferred over brushing, as it provides a more uniform gloss. However, be aware that the friction from brush and roller applications can sometimes cause areas of high and low gloss. Note that Awlcraft 2000 cannot be brushed or rolled.

3. Environmental Conditions:

   • It is recommended to use the flattening agent at temperatures of 20°C (68°F) or higher to ensure optimal performance.

4. Testing:

   • Before full-scale application, conduct a test on a non-critical area to ensure the desired gloss level and appearance are achieved.

Safety and Handling

• Always follow the manufacturer's safety guidelines, including the use of personal protective equipment and ensuring adequate ventilation during application.

By following these guidelines, you can effectively use Awlgrip Flattening Agent G3013 to achieve the desired flat or semi-gloss finish on your urethane topcoats.

Suggested Products

To achieve the best results when using Awlgrip Flattening Agent G3013, consider the following recommended products:

Our team at Fortified Oceanic is available to assist with any enquiries you may have about selecting and using Awlgrip products. Feel free to reach out to us through the following channels:

• Website: www.fortifiedoceanic.com.au

• Instagram: @fortifiedoceanic

• Address: Shop 8, 1-5 Kalinya Street, Newport, NSW 2106

• Phone: (02) 8631 2525

Visit our store or contact us to find the perfect products for your boat's needs.